﻿********************************************************************
KONICA MINOLTA Font Management Utility 2.6.13000
                                                          01/05/2017

Copyright (C) 2006 KONICA MINOLTA, INC.

********************************************************************

This file contains information on using Font Management Utility.
Be sure to read this file before using the application.

1. Introduction
2. System Requirements
3. Supported devices
4. Installing and Uninstalling the Application
5. Checking the Version in the Application
6. Notes and Restrictions

********************************************************************
1. Introduction

Font Management Utility is utility software with which the user can 
download fonts and forms to the MFP via the network.
  
********************************************************************
2. System Requirements

Computer:
    PC-AT compatible machine
CPU:
    Same as specified for your operating system.
Memory (RAM):
    Same as specified for your operating system.
Hard Disk:
    200 MB of available hard-disk space
Supported operating systems:
    Please refer to attached "Appendix1_OS_SupportInfo.txt".
    - Please use the latest version of each operating systems.
    - There may be notes/restrictions depending on your operating systems. 
      Please refer to "6. Notes and Restrictions" for additional information.
Network Environment:
    TCP/IP protocol should be set up correctly.  
Other requirements:
    Microsoft .NET Framework 3.5 (SP1 or later) and .NET Framework 4.5 or later*
    *Both versions of .NET Framework are required.
     The version of .NET Framework that is installed to your computer
     can be checked from Control Panel.
     For more information about installing (or enabling) .NET Framework, 
     please refer to the User’s Guide or the Microsoft website.

********************************************************************
3. Supported devices

Please refer to attached "Appendix2_Device_SupportInfo.txt".
There may be notes/restrictions depending on your  device. 
Please refer to "6. Notes and Restrictions" for additional information.

********************************************************************
4. Installing and Uninstalling the Application

Installation
1. Double click Setup.exe. The installer starts.
2. Proceed with the install as indicated on the screen.
"Note
Before installing the utility, be sure to log in with Administrator rights.
Quit all applications (including virus detection programs) that are running."

Uninstallation
1. Using "Add/Remove Programs" of Control Panel.

********************************************************************
5. Checking the Version in the Application

You can check the version from a running application by the following procedure.
From Menu bar, select [Help] then [About] to display the information dialog.

********************************************************************
6. Notes and Restrictions

- If you attempt to write a large number of fonts to a device at once, the 
  write may fail.
  In this case, add about 50 fonts a time at intervals of five minutes.

- When registering fonts and forms on a device, if you overwrite using the 
  same ID, this function may not work successfully. It is recommended that 
  you do not use the same ID (use the automatic ID setting).

- It may take some time to launch the application. In such a case, 
  please perform the following steps.
  1) Launch Internet Explorer
  2) Open Internet Option under tools menu.
  3) Open Advanced tab and turn off the following setting.
     "Check for server certificate revocation"

- When "User Account Control: Only elevate executables that are signed
  and validated" is enabled at Local Security Policy of Windows Vista, 
  it is not possible to uninstall program by using "Programs and Features" 
  of Control Panel.
  To uninstall program, disable "User Account Control: Only elevate 
  executables that are signed and validated" at Local Security Policy 
  of Windows Vista, or use "setup.exe"  which is used at installation of 
  program.

- In Windows Vista, this software may fail to register devices which exist 
  outside of the network router when you add the device by specifying the 
  device address by clicking [Add] button in [Registration of Device] dialog. 
  In such case, please, register the device by using [Search and Register] 
  button. You need to specify [IPv4 Unicast] search range which contains 
  the device address for searching.

- When Enhanced Security Mode is enabled on the device, PCL Font/Form and 
  OOXML font cannot be added to or deleted from the device. To add or delete 
  PCL Font/ Form and OOXML font, please disable Enhanced Security Mode on 
  the device.

- Please use a Device Certificate signed with an algorithm Microsoft 
  considers valid.

- For the firmware versions of devices that can connect to the
  application, see the following.
    bizhub C450/C450P/C351 Phase2.0 (Card Ver.A7 [4037-0100-G00-B6-***]) 
    or later
    bizhub C250/C250P Phase2.0 (Card Ver.88 [4038-0100-G00-75-***]) or later
    bizhub PRO 1050/1050P 3rd (I Ver30 / C Ver30 / IP Ver.30) or later
    bizhub 750/600 Phase2.0 (Card Ver.20 [57AA-0100-G00-20-***]) or later
    bizhub 500/420 Phase2.0 (Card Ver.20 [50GA-0100-G00-20-***]) or later
  For your firmware version or upgrades, contact your service center
  or dealer.

********************************************************************
Windows is a trademark of Microsoft Corporation in the United States
and other countries.
Other company names and product names are trademarks or registered
trademarks of their respective companies.